【STM32】低功耗相关函数和类型

00. 目录

文章目录

• • 00. 目录
  • 01. 概述
  • 02. 相关类型
  • 03. 相关函数
  • 04. 结构体封装
  • 05. 预留
  • 06. 附录
  • 07. 声明

01. 概述

很多单片机都有低功耗模式，STM32F4 也不例外。在系统或电源复位以后，微控制器处于运行状态。运行状态下的 HCLK 为 CPU 提供时钟，内核执行程序代码。当 CPU 不需继续运行时，可以利用多个低功耗模式来节省功耗，例如等待某个外部事件时。用户需要根据最低电源消耗，最快速启动时间和可用的唤醒源等条件，选定一个最佳的低功耗模式。

在stm32f4xx_pwr.c 和stm32f4xx_pwr.h 文件中。

02. 相关类型

PWR_PVD_detection_level

/** @defgroup PWR_PVD_detection_level * @{*/ 
#define PWR_PVDLevel_0                  PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1                  PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2                  PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3                  PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4                  PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5                  PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6                  PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7                  PWR_CR_PLS_LEV7#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))

PWR_Regulator_state_in_STOP_mode

/** @defgroup PWR_Regulator_state_in_STOP_mode * @{*/
#define PWR_MainRegulator_ON                        ((uint32_t)0x00000000)
#define PWR_LowPowerRegulator_ON                    PWR_CR_LPDS/* --- PWR_Legacy ---*/
#define PWR_Regulator_ON                            PWR_MainRegulator_ON
#define PWR_Regulator_LowPower                      PWR_LowPowerRegulator_ON#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MainRegulator_ON) || \((REGULATOR) == PWR_LowPowerRegulator_ON))

PWR_Regulator_state_in_UnderDrive_mode

/** @defgroup PWR_Regulator_state_in_UnderDrive_mode * @{*/
#define PWR_MainRegulator_UnderDrive_ON               PWR_CR_MRUDS
#define PWR_LowPowerRegulator_UnderDrive_ON           ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MainRegulator_UnderDrive_ON) || \((REGULATOR) == PWR_LowPowerRegulator_UnderDrive_ON))

PWR_STOP_mode_entry

/** @defgroup PWR_STOP_mode_entry * @{*/
#define PWR_STOPEntry_WFI               ((uint8_t)0x01)
#define PWR_STOPEntry_WFE               ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))

PWR_Regulator_Voltage_Scale

/** @defgroup PWR_Regulator_Voltage_Scale * @{*/
#define PWR_Regulator_Voltage_Scale1    ((uint32_t)0x0000C000)
#define PWR_Regulator_Voltage_Scale2    ((uint32_t)0x00008000)
#define PWR_Regulator_Voltage_Scale3    ((uint32_t)0x00004000)
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || \((VOLTAGE) == PWR_Regulator_Voltage_Scale2) || \((VOLTAGE) == PWR_Regulator_Voltage_Scale3))

PWR_Flag

/** @defgroup PWR_Flag * @{*/
#define PWR_FLAG_WU                     PWR_CSR_WUF
#define PWR_FLAG_SB                     PWR_CSR_SBF
#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
#define PWR_FLAG_BRR                    PWR_CSR_BRR
#define PWR_FLAG_VOSRDY                 PWR_CSR_VOSRDY
#define PWR_FLAG_ODRDY                  PWR_CSR_ODRDY
#define PWR_FLAG_ODSWRDY                PWR_CSR_ODSWRDY
#define PWR_FLAG_UDRDY                  PWR_CSR_UDSWRDY/* --- FLAG Legacy ---*/
#define PWR_FLAG_REGRDY                  PWR_FLAG_VOSRDY               #define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR) || \((FLAG) == PWR_FLAG_VOSRDY) || ((FLAG) == PWR_FLAG_ODRDY) || \((FLAG) == PWR_FLAG_ODSWRDY) || ((FLAG) == PWR_FLAG_UDRDY))#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \((FLAG) == PWR_FLAG_UDRDY))

03. 相关函数

/* Function used to set the PWR configuration to the default reset state ******/ 
void PWR_DeInit(void);/* Backup Domain Access function **********************************************/ 
void PWR_BackupAccessCmd(FunctionalState NewState);/* PVD configuration functions ************************************************/ 
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
void PWR_PVDCmd(FunctionalState NewState);void PWR_WakeUpPinCmd(FunctionalState NewState);/* Main and Backup Regulators configuration functions *************************/ 
void PWR_BackupRegulatorCmd(FunctionalState NewState);
void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage);
void PWR_OverDriveCmd(FunctionalState NewState);
void PWR_OverDriveSWCmd(FunctionalState NewState);
void PWR_UnderDriveCmd(FunctionalState NewState);/* FLASH Power Down configuration functions ***********************************/ 
void PWR_FlashPowerDownCmd(FunctionalState NewState);/* Low Power modes configuration functions ************************************/ 
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterUnderDriveSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);/* Flags management functions *************************************************/ 
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);

04. 结构体封装

/** * @brief Power Control*/typedef struct
{__IO uint32_t CR;   /*!< PWR power control register,        Address offset: 0x00 */__IO uint32_t CSR;  /*!< PWR power control/status register, Address offset: 0x04 */
} PWR_TypeDef;

05. 预留

06. 附录

6.1 【STM32】STM32系列教程汇总

网址：【STM32】STM32系列教程汇总

07. 声明

该教程参考了正点原子的《STM32 F4 开发指南》

本文来自互联网用户投稿，文章观点仅代表作者本人，不代表本站立场，不承担相关法律责任。如若转载，请注明出处。 如若内容造成侵权/违法违规/事实不符，请点击【内容举报】进行投诉反馈！