ubuntu20.04 install fluka + flair software

FLUKA is a Monte Carlo based particle transport software which applied in physics, medical, research area. 

安装步骤

1. FLUKA安装：gfortran安装、安装fluka2020.0-linux-gfor64bit-8.4-AA、安装环境准备、检验FLUKA是否安装成功

step1: gfortran安装

$ gfortran -v  

If not installed $ sudo apt install gfortran

step2: 安装fluka2020.0-linux-gfor64bit-8.4-AA

$ mkdir FLUKA

$ tar -zxvf fluka2020.0-linux-gfor64bit-8.4-AA.tar.gz

step3: 安装环境准备

$ export FLUPRO=/home/xxx/FLUKA

$ export FLUFOR=gfortran

$ cd FLUKA

$ make

If make not install,

$ sudo apt install make

$sudo apt install make-guile

2. FLAIR安装：安装环境准备、flair-geoviewer安装、FLAIR主程序安装

step1: 安装环境准备

1. Python 3 install

$ python -v

If not installed

$ sudo apt install python3

$ sudo apt install python

$ sudo apt install python3-minimal

2. Tkinter Tcl/Tk install

$ sudo apt-get install python-tk

$ sudo apt-get install python-tcl

$ sudo apt-get install gnuplot

$ sudo apt-get install python-numpy

$ sudo apt-get install python-dev tk-dev

$ sudo apt-get install python3-dicom

$ sudo apt-get install python3-pil

$ sudo apt-get install python3-matplotlib

$ sudo apt-get install python3-scipy

$ sudo apt-get install python-imaging-tk

step2: flair-geoviewer安装、FLAIR主程序安装

$ sudo dpkg -i flair_2.3-0_all.deb

$ sudo dpkg -i flair-geoviewer_2.3-0_amd64.deb

3. 安装验证

Open flair and use example to test the software.

本文来自互联网用户投稿，文章观点仅代表作者本人，不代表本站立场，不承担相关法律责任。如若转载，请注明出处。 如若内容造成侵权/违法违规/事实不符，请点击【内容举报】进行投诉反馈！