matlab的NVram,NVRAM 跟FLASH的区别

NVRAM 和FLASH的区别

NVRAM: Non-Volatile RAM. The target is to have a electrical device that could be accessed quite fast, most of the time the content is calculated by bytes and the content could be saved after power down. There are different technical

ways to implement this concept such as EEPROM which is very common. Please note, in mobile phone design, most of the time one or two sectors of ROM (most of the time it is FLASH) will be used to simulate NVRAM, the only reason is cost saving since ROM is a

"must" but NVRAM is not.

FLASH: One kind of ROM and the difference to other ROM is semiconductor level. Please note, FLASH must be read/write by sectors but NVRAM should be read/write by bytes. It is why NVRAM driver have to implement an algorithm such as copying all the content in

one sector to RAM first.

NVM: Non-volatie memory. It is more generic concept and covers all the memory components that could keeps its content after power off. It is useful during architecture design when the technical detail could be skipped. In fact, in one project, a DRAM with battery

played as NVM and it worked quite good in that case

本文来自互联网用户投稿，文章观点仅代表作者本人，不代表本站立场，不承担相关法律责任。如若转载，请注明出处。 如若内容造成侵权/违法违规/事实不符，请点击【内容举报】进行投诉反馈！